A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Our Moab-based teams arrive with truck-mount extractors, moisture meters, and drying gear staged and ready to go.
Too many Moab, UT families have called a big national number only to get bounced through hold music before a random subcontractor shows up hours later, so Hirex Water Damage built its Moab operation differently. Every technician on our Moab roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Flood Damage Repair in Moab isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Moab, UT, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Moab, UT so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Ask any Moab property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Moab call at a time.
The most expensive Moab restoration jobs we run almost never started as a dramatic flood; they started as something small that got put off. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Moab dispatcher will give you an honest read on urgency, not a sales pitch.
From a single soaked bedroom to a commercial building with three flooded floors, our Moab teams are equipped to scale up or down — nothing gets a cookie-cutter response.
Truck-mounted extraction equipment on every Moab rig pulls high volumes of standing water fast, so drying starts the same day instead of the next. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
For families in Moab, this covers flood-cut drywall removal, subfloor evaluation, and packing out salvageable belongings for cleaning, with clear photo documentation at every stage for your insurance claim.
Multi-unit and commercial Moab properties get their own project manager plus enough drying equipment to cover the real square footage, not a token setup — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Moab crews are trained for exactly that protocol.
We apply antimicrobial treatment during every Moab drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Our Moab, UT warehouse keeps drying equipment close, which typically puts a Moab tech at your door inside an hour.
Our paperwork is built to match what adjusters expect, and we'll speak with your insurer directly on your behalf.
Final moisture readings have to hit dry-standard before we consider a Moab job done, and getting there again is on us, not you.
A short call with our Moab dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
Our nearest available Moab crew is dispatched immediately with truck-mount extraction gear on board.
Standing water comes out first; drying equipment gets placed only after we've mapped exactly where moisture is hiding.
We re-check moisture levels daily until materials hit dry standard, then hand you full documentation for your records or your insurer.
Our Moab technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
We put that guarantee directly on the Moab work order, not just in an ad. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"We had standing water from a burst water heater and the technician showed up before I even finished mopping the entry way." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"The drying logs they left behind actually made sense — I could see the numbers dropping every day until it was done." — Priya S.
"A supply line failure flooded our kitchen and this crew had us reopened in under a week — much faster than we expected." — Aaron W.
"Sewage backup is not a fun call to make, but the crew treated it professionally and explained the whole containment process." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Because our equipment is staged inside Moab, UT, most Moab calls see a technician on-site within 60 to 90 minutes of the initial call.
We always quote first. You'll see a written estimate for the Moab job before any drying equipment starts running.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Moab properties.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
Dryness is confirmed with instrument readings against a documented dry standard, not just by feeling the wall or carpet.
Blackwater and sewage response is a core part of what our Moab team does, not a job we sub out.
Turn off the water supply if you can reach it safely, keep people and pets out of the flooded area, and don't run electrical devices near standing water.
We scale crews and equipment for commercial Moab accounts and assign a dedicated project lead for anything beyond a single unit.
Typical drying time runs 3-5 days for a Moab home, though a job that sat unaddressed longer can take longer to fully dry.
Quick extraction and drying in Moab significantly lowers mold risk, since spores need sustained moisture over roughly a day or two to establish.
We stand behind every Moab job with a documented dry-standard guarantee and a 30-day callback policy.
See the zip codes and nearby cities listed below — our Moab crews cover that full radius.
Moab is our home base, and our reach extends across Moab, UT through a network of staged equipment and on-call technicians. If your address falls inside or near Moab, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Moab, Moab, UTOne call gets you a Moab-based team, not a routed national queue.
Call +1-844-234-5373